Score:1

Audio always routed to docking station: No sound

ธง in

Sound on my Dell XPS 13 works (and always worked) fine when not plugged in to the docking station. Audio is routed to the built-in speakers by default and when headphones are plugged in, they are used. This also used to work when connected to a docking station. The docking station is a ThinkPad USB-C Dock Audio.

However, since last week Friday, neither headphones nor built-in speakers work anymore when the laptop is connected to the docking station.

When plugging in headphones, the system detects them and shows the dialog to select what device they are (headphones, headset, ...). I have verified that the correct device is selected in Gnome settings and that the volume is set correctly. I also can hear the short volume feedback on the headphones when changing volume.

The only thing that I can remember changing is: For the first time I plugged in a speaker to the 3.5mm jack of the docking station. That was on the day before I first noticed the problem. Since then it seems as if the audio is always routed to the docking station no matter what device I select. I can confirm this by connecting a speaker to the docking station. Sound is always played on that speaker no matter what device I select.

I don't know how to diagnose this problem. This is the output of a command that I found in similar questions:

> aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC3246 Analog [ALC3246 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: Audio [ThinkPad USB-C Dock Audio], device 0: USB Audio [USB Audio]
  Subdevices: 0/1
  Subdevice #0: subdevice #0

With pacmd list-sinks I see the following output:

2 sink(s) available.
  * index: 1
    name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9039
    volume: front-left: 30537 /  47% / -19.90 dB,   front-right: 30537 /  47% / -19.90 dB
            balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 1
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
                 Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
    card: 0 <alsa_card.pci-0000_00_1f.3>
    module: 20
    properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "ALC3246 Analog"
        alsa.id = "ALC3246 Analog"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "0"
        alsa.card = "0"
        alsa.card_name = "HDA Intel PCH"
        alsa.long_card_name = "HDA Intel PCH at 0xdc328000 irq 131"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:1f.3"
        sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
        device.bus = "pci"
        device.vendor.id = "8086"
        device.vendor.name = "Intel Corporation"
        device.product.id = "9d71"
        device.product.name = "Sunrise Point-LP HD Audio"
        device.form_factor = "internal"
        device.string = "front:0"
        device.buffering.buffer_size = "352800"
        device.buffering.fragment_size = "176400"
        device.access_mode = "mmap+timer"
        device.profile.name = "analog-stereo"
        device.profile.description = "Analog Stereo"
        device.description = "Built-in Audio Analog Stereo"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    ports:
        analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
            properties:
                device.icon_name = "audio-speakers"
        analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: yes)
            properties:
                device.icon_name = "audio-headphones"
    active port: <analog-output-headphones>
    index: 2
    name: <alsa_output.usb-Lenovo_ThinkPad_USB-C_Dock_Audio_000000000000-00.iec958-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: RUNNING
    suspend cause: (none)
    priority: 9048
    volume: front-left: 61872 /  94% / -1.50 dB,   front-right: 61872 /  94% / -1.50 dB
            balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 34.06 ms
    max request: 6 KiB
    max rewind: 6 KiB
    monitor source: 4
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
                 Stereo
    used by: 4
    linked by: 5
    configured latency: 36.00 ms; range is 36.00 .. 2000.00 ms
    card: 2 <alsa_card.usb-Lenovo_ThinkPad_USB-C_Dock_Audio_000000000000-00>
    module: 25
    properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "USB Audio"
        alsa.id = "USB Audio"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "0"
        alsa.card = "2"
        alsa.card_name = "ThinkPad USB-C Dock Audio"
        alsa.long_card_name = "Lenovo ThinkPad USB-C Dock Audio at usb-0000:39:00.0-1.4.2.3, full speed"
        alsa.driver_name = "snd_usb_audio"
        device.bus_path = "pci-0000:39:00.0-usb-0:1.4.2.3:1.0"
        sysfs.path = "/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.4/3-1.4.2/3-1.4.2.3/3-1.4.2.3:1.0/sound/card2"
        udev.id = "usb-Lenovo_ThinkPad_USB-C_Dock_Audio_000000000000-00"
        device.bus = "usb"
        device.vendor.id = "17ef"
        device.vendor.name = "Lenovo"
        device.product.id = "3063"
        device.product.name = "ThinkPad USB-C Dock Audio"
        device.serial = "Lenovo_ThinkPad_USB-C_Dock_Audio_000000000000"
        device.string = "iec958:2"
        device.buffering.buffer_size = "352800"
        device.buffering.fragment_size = "176400"
        device.access_mode = "mmap+timer"
        device.profile.name = "iec958-stereo"
        device.profile.description = "Digital Stereo (IEC958)"
        device.description = "ThinkPad USB-C Dock Audio Digital Stereo (IEC958)"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-usb"
    ports:
        iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
            properties:
                
    active port: <iec958-stereo-output>

Is it significant that the sink with ID 1 that includes the internal speakers and the headphones lists used by: 0?

I am happy to provide more information if necessary.

Edit: Temporarily moving one sink input

Inspired by this answer I was able to change the sink of a single input to play on the internal speakers again by running:

pacmd move-sink-input 610 1

(where 610 is from pacmd list-sink-inputs and 1 is the index from the sink listed above).

However this is only works temporarily (I have no clue why it switches back) and only affects one of the inputs. I'd like to find a solution that let's me go back to my previous setup in which I can use the Gnome settings to switch what device audio is played on.

My question:

How can I debug and fix the wrong routing of audio and go back to the way it was before: I was able to select the audio device in the Gnome settings?

in flag
ข้อสังเกตที่น่าสงสัยประการหนึ่ง: ใน Zoom (ซอฟต์แวร์การประชุมทางวิดีโอ) ลำโพงภายในจะทำงาน เมื่อทดสอบซอฟต์แวร์อื่นๆ เช่น VLC ฉันยังสามารถเล่นเสียงจากลำโพงภายในได้อีกด้วย อย่างไรก็ตาม ใน Firefox และ â โดยเฉพาะอย่างยิ่ง â เมื่อใช้ฟังก์ชัน "ทดสอบ" ของการตั้งค่าเสียง Gnome เสียงจะถูกส่งไปยังแท่นวางเสมอ
Cristiano Casciotti avatar
it flag
ฉันมีปัญหาเดียวกันและพฤติกรรมเดียวกัน ลำโพง Zoom ใช้งานได้ดี แต่กับ Slack และเบราว์เซอร์ไม่ได้ ฉันได้ยินเสียงข้อความ (เช่น การแจ้งเตือน) แต่ฉันไม่ได้ยินเสียงจากแหล่งอื่น
in flag
ปัญหาหายไปหลังจากที่ฉันล้างและติดตั้งแพ็คเกจที่เกี่ยวข้องกับเสียงจำนวนมากอีกครั้ง น่าเสียดายที่ตอนนี้มันปรากฏขึ้นอีกครั้ง (ด้วยลำโพงตัวอื่น) ฉันยังคงสูญเสียว่าปัญหาคืออะไร
Score:0
ธง in

ฉันสามารถ (อย่างน้อยก็ชั่วคราว) แก้ไขปัญหาโดยใช้ พาวูคอนโทรล เพื่อเปลี่ยนอุปกรณ์เอาต์พุตสำหรับการใช้งานเฉพาะ

ปัญหาน่าจะเป็นที่ทั้งสองโปรแกรม ไฟร์ฟอกซ์ และ การตั้งค่าคำพังเพย ได้รับการกำหนดค่าให้ใช้อุปกรณ์เสียงที่ไม่ถูกต้อง ฉันไม่ทราบสาเหตุ แต่ด้วยเหตุผลบางอย่างที่เปลี่ยนอุปกรณ์เอาต์พุตเข้า การตั้งค่าคำพังเพย ไม่ส่งผลต่อการกำหนดเส้นทางเสียงสำหรับแอปพลิเคชันใดๆ ที่ใช้เสียง

อย่างไรก็ตามเมื่อใช้ พาวูคอนโทรล ฉันสามารถเปลี่ยนอุปกรณ์เสียงสำหรับแต่ละแอปพลิเคชันแยกกันได้ สิ่งนี้ทำให้ Firefox ใช้อุปกรณ์ส่งออกที่ถูกต้องอีกครั้ง

ติดตั้งด้วย:

sudo apt ติดตั้ง pavucontrol

เรียกใช้แอปพลิเคชัน แอปพลิเคชั่นหลายตัวที่ใช้เสียงแสดงอยู่ในแท็บ การเล่น. ฉันเลือกอุปกรณ์เสียงที่ถูกต้องในเมนูแบบเลื่อนลงถัดจากรายการสำหรับ ไฟร์ฟอกซ์.

โพสต์คำตอบ

คนส่วนใหญ่ไม่เข้าใจว่าการถามคำถามมากมายจะปลดล็อกการเรียนรู้และปรับปรุงความสัมพันธ์ระหว่างบุคคล ตัวอย่างเช่น ในการศึกษาของ Alison แม้ว่าผู้คนจะจำได้อย่างแม่นยำว่ามีคำถามกี่ข้อที่ถูกถามในการสนทนา แต่พวกเขาไม่เข้าใจความเชื่อมโยงระหว่างคำถามและความชอบ จากการศึกษาทั้ง 4 เรื่องที่ผู้เข้าร่วมมีส่วนร่วมในการสนทนาด้วยตนเองหรืออ่านบันทึกการสนทนาของผู้อื่น ผู้คนมักไม่ตระหนักว่าการถามคำถามจะมีอิทธิพลหรือมีอิทธิพลต่อระดับมิตรภาพระหว่างผู้สนทนา